A sprinkler system repair will cost you $75 to $125. The most common issue is the valves. Over time, sprinkler valves become loose, cracked, or damaged, preventing them from delivering water to the lawn and garden. You can easily fix these problems yourself if you’re handy, by tightening the valve and inserting a plumber’s tape to secure it. In more severe cases, a sprinkler valve needs to be replaced.
Some of the most common sprinkler system problems are low sprinkler heads and malfunctioning valves. In the first case, the spray head may be clogged or sink into soft ground. In other cases, the valves may be leaking water, reducing the water pressure of the entire system. For a self-checkup, unplug the sprinklers and walk around each zone to inspect each valve. If you find that any of the irrigation valves have a leak, you can clean them with a specialized solution.
If you can’t find a leak, try checking your sprinkler’s water pressure. The typical residential irrigation system loses 15 to 25 psi when the sprinkler runs. To check your water pressure, attach a pressure gauge to the valve farthest from the connection point. You may need to replace several solenoids. You can consult a manual or contact a professional for this task. You can also check the voltage at a single location to check if your system is functioning properly.
If you’re confident in your skills, you can tackle the task yourself. You don’t need to hire a professional to do it; you can repair individual parts of the sprinkler system. However, you should be careful as you might end up damaging your lawn. It’s also best to consult a professional if you don’t have a lot of experience in this field. The right company can solve all of your sprinkler problems, and they’ll give you a warranty to back up their work.
If your sprinklers are malfunctioning, check the valves. You might need to replace a valve. If you suspect that a switch is faulty, fix it immediately. There may be a broken transformer or fuse. If you suspect that a component isn’t working properly, call a professional. If you need a replacement part, you’ll have to open the valve and remove it from the sprinkler.
A plumber can easily repair a sprinkler system. They charge between $60 and $90 per hour, including parts. If you’re trying to save money, a prepaid yearly plan will only cost you $175. If you don’t want to spend that much, hire a sprinkler maintenance service. It’s a quick way to ensure that the system works properly. If you’re not able to do it, call a sprinkler repair company to do it for you.